35kv 630A Gas Insulated Loadbreak Bushing Well Insert

This plug-in bushing can be used as a fixed section for the entry of medium voltage on switch gears or transformers.
Indoors for vertical or horizontal mounting; outdoors both with and without tension making use of the fitting rubber connector, for vertical or horizontal mounting.
Product name
Rated voltag
Rated current
TGSF6-35/1250-C/F
15KV
630A
QTTG-35/2500-F
15KV
630A

Category: Pad-mounted Transformer and Accessories

SKU: 36GIL-166

Description
Additional information

Description

This plug-in bushing can be used as a fixed section for the entry of medium voltage on switch gears or transformers.

Indoors for vertical or horizontal mounting; outdoors both with and without tension making use of the fitting rubber connector, for vertical or horizontal mounting.

Product name	Rated voltag	Rated current
TGSF6-35/1250-C/F	15KV	630A
QTTG-35/2500-F	15KV	630A

xq_13

Read more

DTBLQ-HY5WS(Z)-17/50 Single-pass Elbow Connector

15kV/200A double elbow lightning arrester is widely used in American box transformer and branch box, buried transformer, switchgear and other equipment. The product increases more space for box transformer, and has the characteristics of simple operation and compact structure.
product structure：
Insulation
Arc suppression chamber
Outer semiconducting layer
Arrester core
Copper bottom cover
Ground wire
order number
Cable cross-sectional area/mm²
Conductor diameter/mm
Cable insulation outer diamet…
Read more

24kV 630A Bus Cross Connector

Bus-bar Connector is widely applicable for the combined connection of ring main units (RMU), gas insulated switchgear (GIS) to supply more branches for expansion, which electrically insulate and mechanically seal the connecting busbar and switchgear.
The interface designed to comply with EN 50180 / EN 50181 interface type C and HD 629.1, IEC 60502.4, GB/T 12706.4 etc.
Product name
Rated voltage
Rated current
Bus Cross Connector
20(24)KV
630A
Read more

ZTPT 15kV 200A Loadbreak Elbow PT Connector

15kV/200A elbow PT connector is used to provide operating power supply for electric operating mechanism. It is applicable to the cable section of 35mm 2 . It is a fully shielded and fully sealed product. The plug connection is very simple, and there is a reliable anti loosening device.
product structure：
Operating ring
Insulation
Inner semiconducting layer
Voltage test point
Outer semiconducting layer
Arc suppression insert rod
Crimp terminal
order number
Cable cross-sectional area/mm²
Conduct…
Read more

Three Phase 13.8kv Pad Mounted Transformer 1000kVA 750kVA Pad-Mounted Transformer

Three Phase Pad Mounted Transformer Specifications:
· Rated power 250kVA to 5,000kVA
· Primary voltage up to 36 kV
· Cooling type: ONAN
· Available Fluids: Mineral Oil/ vegetable oi, FR3 dielectric fluid, PCB Free
Three
Phase Pad Mounted Transformer
Standards Compliant:
· IEEE C57.
· NEMA 260/NEMA ATS/NEMA 70
· GOST R 52719-2007 Power transformers. General specifications
· GB 6451 Technical Specifications And Requirements For Oil-Immersed Power Transformers
· Compliant Transformers,Distribution …