Insulation Phenolic Resin Gasket For Transformer

Product Introduction:
Phenolics are a fabricated reinforced laminate produced from a fine weave cotton cloth impregnated with a phenolic resin binder. The fine weave linen yields good mechanical properties,dimensional stability and a better finish for machined .

Category: Insulation Material

SKU: IPRGF-311

Description
Additional information

Description

Product Introduction:

Phenolics are a fabricated reinforced laminate produced from a fine weave cotton cloth impregnated with a phenolic resin binder. The fine weave linen yields good mechanical properties,dimensional stability and a better finish for machined .

Read more

Asbestos-Free Oil Resistant Fiber Paper Gasket for Transformer

Product Introduction:
This is a fully cured reinforced cellulose fiber / nitrile butadiene gasket material with excellent crush resistance at high flange pressures. This material has superior sealing properties with fuel, oil and water.This material has a short duration maximum temperature limit of 230oC (455F).Some common applications include automotive, small engine and compressor ,engine and transmission pan, water pump, and environmental sealing.
Features:
Excellent water and oil resistance,…
Read more

Oil duct strip and Other Insulation molding parts of 35KV and below

Oil duct strip is composed of rectangular strip and diamond dotted insulation paper,it’s widely used in oilimmersed transformer.The product can avoid the weaknesses of easy deformation,easy to produce displacement and others.It can combine with the coil very well,has better mechanical and electrical properties.
Insulation molding parts include end ring, a pressing ring, the whole insulation tube stay, angle ring, lead angle ring piece, overall angle ring and series products. They are produced by…
Read more

Electrical composite coaming board

We produce electrical composite coaming board by multilayer composite of polyester film and non-woven fabric,special heat resistant adhesive as the bonding material.And then surface treatment with special resin.The product has very high mechanical and electrical properties.The shrinkage and humidity absorption is low.And the thermal endurance property is very reliable.Electrical composite coaming board is mainly used for the winding of the low voltage coils in dry-typetransformers.It can replace…
Read more

Grade H pre-impregnated material

Base material ofgradeHpre-impregnated insulating materialis aflexible composite made with polyimide.Nomex or other materials with temp,index over 180??.It’s phase B pre-impregnated material with thermal upgraded resin after baking process.The product has very high mechanical properties,dielectric and thermal upgraded properties.After winding with copper or aluminum foils,the insulation layers are very solid after heating process.This product is ideal grade H insulatingmaterial for layer insulatin…